Products

Fixed Mount Barcode Scanner


Product Information

Model: NLS-FM3050
Product Category: Fixed Mount Barcode Scanner
Data type: 2D Bar Codes
Reading Mode:
CMOS
Interface: RS-232, USB
Wireless: None


Overview
Designed primarily for such applications as electronic tickets/coupons, mobile marketing and office automation, the NLS-FM30 series fixed mount barcode scanner is able to read barcodes from paper and mobile phones.

Features

Digital Barcode Data Capture

Capable of reading 1D and 2D barcodes off mobile phones.


Printed Barcode Data Capture

Capable of reading 1D and 2D barcodes printed on paper.


Swift Scanning

Delivers effortless, snappy and accurate reading of barcodes on various mobile phone LCD screens with different contrast ratios, colors and reflectance.


Easy to Use

Simple configuration by scanning the programming barcodes provided in the user guide.



Specification

Performance

Processor

IOTC 0370 CHIP

Image Sensor

752×480 CMOS

Interface

RS-232 (9.6~115.2Kbps) / USB 1.1 (HID-KBW, HID-POS)

Symbologies

2D

PDF417, Data Matrix, QR Code

1D

EAN-13, EAN-8, UPC-A, UPC-E, ISSN, ISBN, Codabar, Code 128, Code 93, ITF-6, ITF-14, Interleaved 2 of 5, Industrial 2 of 5, Standard 2 of 5, Matrix 2 of 5, GS1 Databar (RSS-Expand, RSS-Limited, RSS-14), Code 39, Code 11, MSI-Plessey, Plessey

Scan Mode

Sense mode

Resolution

10mil

Light Source

White LED

Scan Window

38.3mm×60.4mm

PCS

≥30%

FOV

Diagonal: 85°,    Horizontal: 63.7°,    Vertical: 70°

Mechanical/Electrical

Power Consumption

1.75W (max.)

Notification

Beep

Dimensions (L x W x H)

78.2×67.2×62mm

Weight

300g

Environmental

Operating Temperature

-10°C - +50°C

Storage Temperature

-20°C - +60°C

Humidity

5% - 95% (non-condensing)

Ambient Light

0 ~ 100,000 LUX

Certifications

FCC Part15 Class B, CE EMC Class B

Accessories

Cable

RS-232 Cable

Equipped with a power connector; used to connect the scanner to a host device.

USB Cable

Used to connect the scanner to a host device.

Power Adapter

Used to provide power for the scanner.
Output: DC5V, 0.5A;  Input: AC100~240V, 50~60Hz.

 

**Test conditions:

Code 39, 3 Bytes; Resolution=10mil; W:N=2.5:1; PCS=0.8; Barcode Height=40mm; Scan Distance=210mm, T=23℃,  Illumination= 200 LUX


*Specifications are subject to change without notice*



  Document Name Size Document Type
1 NLS-FM30 Datasheet 199K Datasheet
2 NLS-FM30 User_Guide 1909K User_Guide


1. How to confirm the types of your equipment, X+? X? or other type?
A. X+ type(EM2027 series, last number of serial number is "X+"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW,RS232.
X type(EM2100 series,last number of serial Number is "X"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW,RS232.

2. How to confirm whether the driver has been installed successfully?
A. First, confirm the equipment had connected to PC and the equipment operating normally.
Open: Control Panel> Device Manager> Universal Serial Bus Controller,
 If there is "Newland USB Datapipe to series Device" said connection is "USB Com Port Emuation"--COM.
 If there is "Newland USB DataPipe Device" said connection is "USB-DataPipe".
 If there is yellow "!" before the equipment, delete the equipment, and then scan detection hardware changes,  Wait for the system to automatically install the new drivers finished.

3. Whether it is necessary upgrade the driver of USB-Datapipe from the old version to the new v1.2 USB driver (vcomctrl v1.2.exe)?
A. The new driver support USB Interface of X+ : USB-DataPipe/ USB Com Port Emuation/HID-KBW. If the users of X series, had developed their own application through the USB SDK, recommendations are not updated to the latest driver.

4. If you have installed v1.2 USB driver, how to connect by USB-Datapipe?
A. If your equipment is X+ series, read the set code of USB-Datapipe.(You can download The Manual of Settings Code free from this website.) If your equipment is X series, first you should close USB to COM serve, open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, Startup Type: Manual.

5. After installed the new driver, how to find out the COM port corresponding to the USB Com Port Emuation?
A. Open Start> all the procedures>vcomctrl>vcomctrl, you can find the number of the COM port there.

6. Why QuickSet can not connect the equipment through USB after installed v1.2 driver?
A. Confirm FAQ-1 driver has installed correctly --> Check out the number of COM port of FAQ-4 --> Confirmed equipment has been launched. Open the Quickset, select the right COM port,manual detection. If the detection failed, you can choose one of the following ways to solve the problem:

i.Check out whether swich to HID-KBW and have set Non-HID-KBW when read The Manual of Settings Code. Change and connect it again.

ii. If it connect through COM before, open "File>PC comm... > USB>OK" in Quickset, try whether it work.

iii. Close Quickset, close connection then open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, and then start it again. Connect the equipment, open Quickset, try connection through COM.

iv. Close Quickset, close connection. Reboot the equipment, open Quickset, connect it again.



  Document Name Size Document Type
1 signed_driver for 2D_chip_MCU.zip 6K Driver



Cable

USB Cable 
Communication with PC 
Model:CBL024U

RS232 Cable 
Communication with PC 
Model:CBL037R

Ps2 Cable 
Communication with PC 
Model:CBL013P



NEWS

Newland President Ms. Wang Jing joined China-Germany Economic Advisory Committee CEO Roundtable
More »
Season II Overseas Exhibition Start Now
More »
Newland release the first 2D-barcode decoder chip on the world wide scale
More »
Newland and Datalogic sign the Cooperative Strategy Framework Agreement
In November 11th, Fujian Newland Computer Co., LTD. and Datalogic SpA.(Italy) formally sign the Cooperative Strategy Framework Agreement in Beijing International Hotel.

More »