Products

Desktop Barcode Scanner


Product Information

Model: NLS-FR4060
Product Category: Desktop Barcode Scanner
Data type: 2D Bar Codes
Reading Mode:
CMOS
Interface: RS-232, USB, PS/2
Wireless: None


Features

Quick to Switch Mode

The Scan Mode Switch at the top of the scanner allows users to swiftly toggle between the Regular and Screen modes.


Superior Motion Tolerance

Exceptional motion tolerance (2.5m/s) and large FOV (46°) enhance user experience.


IP50-rated Sealing

An IP50-rated seal renders the scanner impervious to dust, water and other contaminant.


Superb Reading Performance

Armed with Newland’s fifth-generation of  technology, the scanner is capable of reading 1D as well as high-volume 2D barcodes on the screen covered with protective film.


IR Trigger

The IR sensor in the scanner enables speedy capture of barcodes presented to it, markedly increasing throughput and productivity.




Specification

Performance

Image Sensor

752*480 CMOS

Symbologies

2D          PDF417, QR Code, Data Matrix, Chinese Sensible Code

1D          EAN-13, EAN-8, UPC-A, UPC-E, ISSN, ISBN, Codabar,
Code 128, Code 93, ITF-6, ITF-14, Interleaved 2 of 5,
Industrial 2 of 5, Standard 2 of 5, Matrix 2 of 5, GS1 Databar, Code 39, Code 11, MSI-Plessey, Plessey, etc.

Resolution

≥5mil

Typical Depth of Field

Code 39     10-100mm (5mil)

UPC-A       0-250mm (13mil)

PDF 417     0-80mm (6.67mil)

Data Matrix  10-90mm (10mil)

QR Code     10-150mm (15mil)

Motion Tolerance

2.5m/s

Scan Angle

Pitch        ±60°@ 0°Roll and 0° Skew

Roll         ±360°@ 0°Pitch and 0° Skew

Skew        ±55°@ 0°Roll and 0° Pitch

Symbol Contrast

≥25%

Interface

RS-232, USB

Physical/
Electric

Dimensions (L×W×H)

83×81×148mm

Weight

292g

Notification

Beep, LED indicator

Current

Operating   150mA

Standby     120mA

Environmental

Operating Temperature

-20℃~50℃

Storage Temperature

-40℃~70℃

Humidity

5%~95% (non-condensing)

ESD

±14 kV(air discharge),±8 kV(direct discharge)

Drop

1.2m drops to concrete (for six sides, one drop per side)

Sealing

IP50

Certifications

FCC Part15 Class B,CE EMC Class B

Accessories

Cable

USB         Used to connect the scanner to a host device.
RS-232      Equipped with a power connector;used to connect the scanner to a host device.

Power Adapter

Used to provide power for the scanner.
Output: DC5V,1.5A; Input: AC100~240V, 50~60Hz

 

**Test conditions:

Code 39, 3 Bytes; Resolution=10mil; W:N=2.5:1; PCS=0.8; Barcode Height=40mm; Scan Distance=210mm, T=23℃,  Illumination= 200 LUX


*Specifications are subject to change without notice*



  Document Name Size Document Type
1 NLS-FR4060 Datasheet 239K Datasheet
2 NLS-FR4060 User_Guide 2138K User_Guide


1. How to confirm the types of your equipment, X+? X? or other type?
A. X+ type(EM2027 series, last number of serial number is "X+"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW,RS232.
X type(EM2100 series,last number of serial Number is "X"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW,RS232.

2. How to confirm whether the driver has been installed successfully?
A. First, confirm the equipment had connected to PC and the equipment operating normally.
Open: Control Panel> Device Manager> Universal Serial Bus Controller,
 If there is "Newland USB Datapipe to series Device" said connection is "USB Com Port Emuation"--COM.
 If there is "Newland USB DataPipe Device" said connection is "USB-DataPipe".
 If there is yellow "!" before the equipment, delete the equipment, and then scan detection hardware changes,  Wait for the system to automatically install the new drivers finished.

3. Whether it is necessary upgrade the driver of USB-Datapipe from the old version to the new v1.2 USB driver (vcomctrl v1.2.exe)?
A. The new driver support USB Interface of X+ : USB-DataPipe/ USB Com Port Emuation/HID-KBW. If the users of X series, had developed their own application through the USB SDK, recommendations are not updated to the latest driver.

4. If you have installed v1.2 USB driver, how to connect by USB-Datapipe?
A. If your equipment is X+ series, read the set code of USB-Datapipe.(You can download The Manual of Settings Code free from this website.) If your equipment is X series, first you should close USB to COM serve, open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, Startup Type: Manual.

5. After installed the new driver, how to find out the COM port corresponding to the USB Com Port Emuation?
A. Open Start> all the procedures>vcomctrl>vcomctrl, you can find the number of the COM port there.

6. Why QuickSet can not connect the equipment through USB after installed v1.2 driver?
A. Confirm FAQ-1 driver has installed correctly --> Check out the number of COM port of FAQ-4 --> Confirmed equipment has been launched. Open the Quickset, select the right COM port,manual detection. If the detection failed, you can choose one of the following ways to solve the problem:

i.Check out whether swich to HID-KBW and have set Non-HID-KBW when read The Manual of Settings Code. Change and connect it again.

ii. If it connect through COM before, open "File>PC comm... > USB>OK" in Quickset, try whether it work.

iii. Close Quickset, close connection then open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, and then start it again. Connect the equipment, open Quickset, try connection through COM.

iv. Close Quickset, close connection. Reboot the equipment, open Quickset, connect it again.



  Document Name Size Document Type
1 signed_driver for 2D_chip_MCU.zip 7K Driver
2 JposScannerV1.0.zip 16.7M Driver
3 OPOS Newland Scanner V1.1.0.zip 1257K Driver



Cable

USB Cable 
Communication with PC 
Model:CBL024U

RS232 Cable 
Communication with PC 
Model:CBL037R

Ps2 Cable 
Communication with PC 
Model:CBL013P



NEWS

Newland President Ms. Wang Jing joined China-Germany Economic Advisory Committee CEO Roundtable
More »
Season II Overseas Exhibition Start Now
More »
Newland release the first 2D-barcode decoder chip on the world wide scale
More »
Newland and Datalogic sign the Cooperative Strategy Framework Agreement
In November 11th, Fujian Newland Computer Co., LTD. and Datalogic SpA.(Italy) formally sign the Cooperative Strategy Framework Agreement in Beijing International Hotel.

More »