Products

Handheld Scanners


Product Information

Model: NLS-HR2260
Product Category: Cordless 2D Bar Code Scanner
Data type: 2D Bar Codes
Reading Mode:
CMOS
Interface: RS-232, USB, PS/2
Wireless: None


Features

Outstanding Performance

Equipped with Newland’s third-generation decoder chip, the NLS-HR22 can effortlessly capture high-density, high-volume and distorted barcodes printed on paper or displayed on screen


Elegant Appearance

Blending ergonomics and aesthetics in its design, the NLS-HR22 not only ensures operator comfort and productivity for intensive hand-held scanning but also meets the aesthetic needs of the O2O era.


Cost-effective Solution

The NLS-HR22 provides a cost-effective data capture solution that allows customers to enjoy the capabilities of 2D barcode scanner for the price of 1D scanner.


Durable Construction

The NLS-HR22, built into an IP42-sealed and drop resistant (1.2m) housing with no moving parts, fortifies itself inside and out

 



Specification

Performance

Image Sensor

640×480 CMOS

Light Source

Red LED (625±10nm)

Symbologies

2D          PDF417, QR Code (QR1/2, Micro), Data Matrix (ECC200, ECC000,050, 080, 100, 140)

1D          Code 128, UCC/EAN-128, AIM-128, EAN-8, EAN-13, ISBN/ISSN, UPC-E, UPC-A, Interleaved 2 of 5, Febraban, ITF-6, ITF-4, Matrix 2 of 5, Industrial 25, Standard 25, Code 39, Code 32, Codabar, Code 93, Code 11, Plessey, MSI-Plessey, GS1-DataBarTM(RSS), (RSS-14, RSS-Limited, RSS-Expand)

Resolution

≥3mil

Typical Depth of Field

EAN-13      40mm-355mm(13mil)
Code 39     28mm-155mm(5mil)
PDF 417     28mm-95mm(6.67mil)
Data Matrix  25mm-95mm(10mil)
QR          25mm-150mm(15mil)

Scan Angle

Pitch        ±60°@ 0°Roll and 0° Skew

Roll         360°@ 0°Pitch and 0° Skew

Skew        ±55°@ 0°Roll and 0° Pitch

Min. Symbol Contrast

30%

Interfaces

RS-232, USB, PS/2

Physical

Dimensions (L×W×H)

145×101×68mm

Weight

165g

Notification

Beep, LED indicator

Power Adapter (optional)

Output: DC 5V, 1.5A   Input: AC 100~240V, 50~60Hz

Current

Maximum   <270mA

Operating   140±15mA

Standby     14.3±2mA

Environmental

Operating Temperature

-20℃~50℃

Storage Temperature

-40℃~70℃

Humidity

5%~95% (non-condensing)

ESD

±8 KV (contact discharge);  ±15 KV (air discharge)

Drop

1.2m

Sealing

IP42

Certifications

FCC Part15 Class B,CE EMC Class B

**Test conditions:

Code 39, 3 Bytes; Resolution=10mil; W:N=2.5:1; PCS=0.8; Barcode Height=40mm; Scan Distance=210mm, T=23℃,  Illumination= 200 LUX


*Specifications are subject to change without notice*



  Document Name Size Document Type
1 NLS-HR2260 Datasheet 225K Datasheet
2 NLS-HR2260 User_Guide 2472K User_Guide


1. How to confirm the types of your equipment, X+? X? or other type?
A. X+ type(EM2027 series, last number of serial number is "X+"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW,RS232.
X type(EM2100 series,last number of serial Number is "X"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW,RS232.

2. How to confirm whether the driver has been installed successfully?
A. First, confirm the equipment had connected to PC and the equipment operating normally.
Open: Control Panel> Device Manager> Universal Serial Bus Controller,
 If there is "Newland USB Datapipe to series Device" said connection is "USB Com Port Emuation"--COM.
 If there is "Newland USB DataPipe Device" said connection is "USB-DataPipe".
 If there is yellow "!" before the equipment, delete the equipment, and then scan detection hardware changes,  Wait for the system to automatically install the new drivers finished.

3. Whether it is necessary upgrade the driver of USB-Datapipe from the old version to the new v1.2 USB driver (vcomctrl v1.2.exe)?
A. The new driver support USB Interface of X+ : USB-DataPipe/ USB Com Port Emuation/HID-KBW. If the users of X series, had developed their own application through the USB SDK, recommendations are not updated to the latest driver.

4. If you have installed v1.2 USB driver, how to connect by USB-Datapipe?
A. If your equipment is X+ series, read the set code of USB-Datapipe.(You can download The Manual of Settings Code free from this website.) If your equipment is X series, first you should close USB to COM serve, open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, Startup Type: Manual.

5. After installed the new driver, how to find out the COM port corresponding to the USB Com Port Emuation?
A. Open Start> all the procedures>vcomctrl>vcomctrl, you can find the number of the COM port there.

6. Why QuickSet can not connect the equipment through USB after installed v1.2 driver?
A. Confirm FAQ-1 driver has installed correctly --> Check out the number of COM port of FAQ-4 --> Confirmed equipment has been launched. Open the Quickset, select the right COM port,manual detection. If the detection failed, you can choose one of the following ways to solve the problem:

i.Check out whether swich to HID-KBW and have set Non-HID-KBW when read The Manual of Settings Code. Change and connect it again.

ii. If it connect through COM before, open "File>PC comm... > USB>OK" in Quickset, try whether it work.

iii. Close Quickset, close connection then open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, and then start it again. Connect the equipment, open Quickset, try connection through COM.

iv. Close Quickset, close connection. Reboot the equipment, open Quickset, connect it again.



  Document Name Size Document Type
1 signed_driver for 2D_chip_MCU.zip 7K Driver
2 JposScannerV1.0.zip 16.7M Driver
3 OPOS Newland Scanner V1.1.0.zip 1257K Driver



Cable

USB Cable 
Communication with PC 
Model:CBL024U

RS232 Cable 
Communication with PC 
Model:CBL037R

Ps2 Cable 
Communication with PC 
Model:CBL013P



NEWS

Newland President Ms. Wang Jing joined China-Germany Economic Advisory Committee CEO Roundtable
More »
Season II Overseas Exhibition Start Now
More »
Newland release the first 2D-barcode decoder chip on the world wide scale
More »
Newland and Datalogic sign the Cooperative Strategy Framework Agreement
In November 11th, Fujian Newland Computer Co., LTD. and Datalogic SpA.(Italy) formally sign the Cooperative Strategy Framework Agreement in Beijing International Hotel.

More »