Products

OEM Products


Product Information

Model: NLS-EM2039
Product Category: 2D Barcode Scan Engine
Data type: 2D Bar Codes
Reading Mode:
CMOS
Interface: TTL-232, USB
Wireless: None


Overview
NLS-EM2039 series OEM scan engines, armed with the Newland patented , a computerized image recognition system, bring about a new era of 2D barcode scan engines. The NLS-EM2039s’ 2D barcode decoder chip ingeniously blends technology and advanced chip design & manufacturing, which significantly simplifies application design and delivers superior performance and solid reliability with low power consumption. The NLS-EM2039s support all mainstream 1D and standard 2D barcode symbologies (e.g., PDF417, QR Code Model 1/2, Micro QR and Data Matrix) as well as GS1-DataBarTM(RSS) (Limited/Stacked/Expanded versions). Image capture, illumination/aiming and decoder are built into such compact, lightweight engines that fit easily into even the most space-constrained equipments such as data collectors, meter readers, ticket validators and PDAs.

 

Features

2D Barcode Decoder Chip

The engine armed with the state-of-the-art 2D barcode decoder chip invented by Newland demonstrates unprecedented reading performance.


Two-In-One Design

Seamless integration of CMOS image sensor and decoder board makes the engine small, lightweight and easy for integration.


Outstanding Reading Capability

The EM2039s can read most 1D and 2D barcodes.


Compatibility

The EM2039s are compatible with the EM2037s in interface and installation.




Specification

Performance

Image Sensor

752×480 CMOS

Processor

Newland IOTC 2D Barcode Decoder Chip 72MHz

Illumination

Red LED 625±10 nm

Symbologies

2D

PDF417, Data Matrix (ECC200,ECC000,050,080,100,140), QR Code.

1D

Code128, EAN-13, EAN-8, Code39, UPC-A, UPC-E, Codabar, Interleaved 2 of 5, ITF-6, ITF-14, ISBN, Code 93, UCC/EAN-128, GS1 Databar, Matrix 2 of 5, Code 11, Industrial 2 of 5, Standard 2 of 5, Plessey, MSI-Plessey, etc.

Reading Precision

≥ 5mil

Depth of Field

UPC-A

55mm - 305mm(13mil);

PDF417

65mm - 175mm(6.67mil); 50mm - 215mm(10mil)

Data Matrix

50mm - 220mm(15mil);

QR Code

65mm - 235mm(15mil)

Symbol Contrast

≥ 25%

Field of View

Horizontal 42°;  Vertical 27.5°

Scan Angle**

Roll: 360°;  Pitch: ±55°;  Skew: ±55°

Mechanical/Electrical

Interface

TTL-232, USB (HID-KBW, COM Port Emulation, HID-POS)

Operating Voltage

3.3~5.5VDC

Current @5VDC

Operating Current

260 mA

Idle Current

12mA

Weight

Two-in one type: 11.5g;  Split type: 8.2g

Environmental

Operating Temperature

-20°C to +60°C

Storage Temperature

-40°C to +80°C

Humidity

5% to 95% (non-condensing)

Ambient Light

0 ~ 100,000 LUX (natural light)

Certifications

 

Accessories

NLS-EVK2037

Software development board for the NLS-EM2039, equipped with a trigger button, beeper and RS-232 & USB interfaces.

Cables

RS-232 Cable

Equipped with a power connector;used to connect the NLS-EVK2037 to a host device.

USB Cable

Used to connect the NLS-EVK2037 to a host device.

Power Adaptor

Used to provide power for the NLS-EVK2037.
Output: DC5V,1.5A;  Input: AC100~240V, 50~60Hz.

**Test conditions:
Code 39; 3 Bytes; Resolution=10mil; W:N=3:1; PCS=0.8; Barcode Height=11mm; Scan Distance=120mm; T=23℃; Illumination=300 lux.

 

**Test conditions:

Code 39, 3 Bytes; Resolution=10mil; W:N=2.5:1; PCS=0.8; Barcode Height=40mm; Scan Distance=210mm, T=23℃,  Illumination= 200 LUX


*Specifications are subject to change without notice*



  Document Name Size Document Type
1 NLS-EM2039 Datasheet 240K Datasheet
2 NLS-EM2039 User_Guide 715K User_Guide
3 NLS-EM2039 Integration_Guide 1820K Integration_Guide


1. How to confirm the types of your equipment, X+? X? or other type?
A. X+ type(EM2027 series, last number of serial number is "X+"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW,RS232.
X type(EM2100 series,last number of serial Number is "X"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBW,RS232.

2. How to confirm whether the driver has been installed successfully?
A. First, confirm the equipment had connected to PC and the equipment operating normally.
Open: Control Panel> Device Manager> Universal Serial Bus Controller,
 If there is "Newland USB Datapipe to series Device" said connection is "USB Com Port Emuation"--COM.
 If there is "Newland USB DataPipe Device" said connection is "USB-DataPipe".
 If there is yellow "!" before the equipment, delete the equipment, and then scan detection hardware changes,  Wait for the system to automatically install the new drivers finished.

3. Whether it is necessary upgrade the driver of USB-Datapipe from the old version to the new v1.2 USB driver (vcomctrl v1.2.exe)?
A. The new driver support USB Interface of X+ : USB-DataPipe/ USB Com Port Emuation/HID-KBW. If the users of X series, had developed their own application through the USB SDK, recommendations are not updated to the latest driver.

4. If you have installed v1.2 USB driver, how to connect by USB-Datapipe?
A. If your equipment is X+ series, read the set code of USB-Datapipe.(You can download The Manual of Settings Code free from this website.) If your equipment is X series, first you should close USB to COM serve, open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, Startup Type: Manual.

5. After installed the new driver, how to find out the COM port corresponding to the USB Com Port Emuation?
A. Open Start> all the procedures>vcomctrl>vcomctrl, you can find the number of the COM port there.

6. Why QuickSet can not connect the equipment through USB after installed v1.2 driver?
A. Confirm FAQ-1 driver has installed correctly --> Check out the number of COM port of FAQ-4 --> Confirmed equipment has been launched. Open the Quickset, select the right COM port,manual detection. If the detection failed, you can choose one of the following ways to solve the problem:

i.Check out whether swich to HID-KBW and have set Non-HID-KBW when read The Manual of Settings Code. Change and connect it again.

ii. If it connect through COM before, open "File>PC comm... > USB>OK" in Quickset, try whether it work.

iii. Close Quickset, close connection then open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, and then start it again. Connect the equipment, open Quickset, try connection through COM.

iv. Close Quickset, close connection. Reboot the equipment, open Quickset, connect it again.



  Document Name Size Document Type
1 signed_driver for 2D_chip_MCU.zip 7K Driver



NEWS

Newland President Ms. Wang Jing joined China-Germany Economic Advisory Committee CEO Roundtable
More »
Season II Overseas Exhibition Start Now
More »
Newland release the first 2D-barcode decoder chip on the world wide scale
More »
Newland and Datalogic sign the Cooperative Strategy Framework Agreement
In November 11th, Fujian Newland Computer Co., LTD. and Datalogic SpA.(Italy) formally sign the Cooperative Strategy Framework Agreement in Beijing International Hotel.

More »